BUK219-50Y,127
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 Formed Leads |
| Surface Mount | NO |
| Operating Temperature | 150°C TJ |
| Packaging | Tube |
| Published | 2001 |
| Series | TOPFET™ |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BUK2 |
| Pin Count | 3 |
| JESD-30 Code | R-PSFM-T5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Power Supplies | 5.5/35V |
| Interface | On/Off |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 90 μs |
| Output Peak Current Limit-Nom | 2A |
| Rds On (Typ) | 135m Ω |
| Turn Off Time | 90 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| RoHS Status | ROHS3 Compliant |
BUK219-50Y,127 Overview
The LED driver's packaged as a Tube.The TO-220-5 Formed Leads package contains it.The mounting type of the LED driver is Through Hole.It owns the General Purpose switch type.It is recommended that the temperature be set to 150°C TJ for reliable operation.The lighting driver is equipped with 1 outputs that can be used.The LED driving board operates at Not Required volts.It has a maximum output voltage of N-Channel volts.The lighting driver has Status Flag features.There is a BUK2 family of things that it belongs to.It contains 5 terminations.There are 1 functions of the LED driver.There is a maximum output of 2AV from the LED driver.A total of 3 pins are present on it.Electrical components such as this are included in the TOPFET? series.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.In this case, the power supply is 5.5/35V.
BUK219-50Y,127 Features
BUK219-50Y,127 Applications
There are a lot of NXP USA Inc. BUK219-50Y,127 Power Switches ICs applications.
- USB Power Distribution
- USB Power Distribution
- PC Cards
- Hot Swap
- Gaming
- Low Voltage I/O System Power
- Handheld Devices
- USB Ports/Hubs
- Portable GPS Device
- Various applications equipped with buttons