BU7252SFVM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Contact Plating | Copper, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~105°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BU7252 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Push-Pull |
| Operating Supply Voltage | 2.75V |
| Number of Elements | 2 |
| Power Supplies | 3V |
| Nominal Supply Current | 35μA |
| Output Current | 6mA |
| Propagation Delay | 550 ns |
| Quiescent Current | 65μA |
| Response Time | 50 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 11mV |
| Voltage Gain | 90dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Current - Quiescent (Max) | 65μA |
| Voltage - Input Offset (Max) | 11mV @ 3V |
| Current - Input Bias (Max) | 1pA @ 3V |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 6mA @ 3V |
| Height Seated (Max) | 0.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BU7252SFVM-TR Overview
The product is packaged in 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) to facilitate transportation.A comparator with a Push-Pull output is used here.The chip is packaged with Tape & Reel (TR) .You can find 8 terminals of the comparator.The electrical component here belongs to the Comparator family.In the presence of a 3V voltage, the comparator is capable of accomplishing a variety of demanding tasks.When it comes to types, this comparator is a typical General Purpose .There are a total of 2 elements in it.The device contains 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~105°C to prevent malfunctions.8 pins are present on the comparator.Try search BU7252 to get more pin-to-pin solutions for your special needs.The comparator presents a quiescent current of 65μA volts.The board has a Surface Mount for mounting on a PCB or any other board.The nominal supply current of the device should be 35μA for normal use.3V power supplies are enough to run the device.There is a maximum current that can be input into the device of 1pA .According to the voltage formula, the part has a voltage gain of 90dB .The normal operation of the system requires 2.75V operating voltage.
BU7252SFVM-TR Features
Push-Pull output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~105°C
Quiescent Current: 65μA
Voltage Gain: 90dB
BU7252SFVM-TR Applications
There are a lot of ROHM Semiconductor BU7252SFVM-TR linear comparators applications.
- Wearable Devices
- Portable Battery Monitoring
- General Purpose Low Voltage Applications
- Infotainment and Clusters
- Handheld Instruments
- Portable and Battery-Powered Systems
- High-Speed Sampling Circuits
- Window Comparators
- Power Supervision
- Motor drives