BU7250G-TR
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Operating Temperature | -40°C~85°C |
| Packaging | Cut Tape (CT) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | CMOS |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G5 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Output Current | 6mA |
| Propagation Delay | 750 ns |
| Quiescent Current | 35μA |
| Response Time | 750 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V ±0.9V~2.75V |
| Input Offset Voltage (Vos) | 11mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 1pA |
| Input Bias Current | 1pA |
| Voltage - Input Offset (Max) | 11mV @ 3V |
| Current - Input Bias (Max) | 1pA Typ |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 6mA @ 3V |
| Propagation Delay (Max) | 750ns (Typ) |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
BU7250G-TR Overview
The product is packaged in SC-74A, SOT-753 in order to facilitate transportation.The comparator has a Open Drain output.As a result, it is designed with Cut Tape (CT) package.You can find 5 terminals of the comparator.Electronic comparator is a component of the Comparator family.A comparator supplied with 3V voltage can complete many demanding tasks.Electronic comparator can be classified as a CMOS chip.A total of 1 elements can be found in it.The recommended mounting type is Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.As a result, this comparator displays a quiescent current of 35μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is possible to input up to 1pA current into the device.
BU7250G-TR Features
Open Drain output capability
CMOS IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 35μA
BU7250G-TR Applications
There are a lot of ROHM Semiconductor BU7250G-TR linear comparators applications.
- Battery-Powered Electronics
- Set Top Boxes
- Ultra-Low Power Systems
- General-Purpose Portable Devices
- Limit Comparators
- High-Speed Sampling Circuits
- Body Control Modules
- Portable Battery Monitoring
- Consumer Medical Electronics
- Wide Range VCO; MOS Clock Timers