BTT60302EKBXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 20 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | Automotive, AEC-Q100 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PDSO-G14 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 36V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Current - Output (Max) | 4A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~36V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 70 μs |
| Output Peak Current Limit-Nom | 4A |
| Rds On (Typ) | 32m Ω |
| Turn Off Time | 70 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.7mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
BTT60302EKBXUMA1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 14-SOIC (0.154, 3.90mm Width) Exposed Pad package contains it.Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.By default, it is set to output 2.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.A total of 14 terminations have been recorded.The LED driver has 1 functions.This LED driver has a maximum output of 4AV.It is possible to obtain high efficiency with a supply voltage of 28V.It belongs to the Automotive, AEC-Q100 series.Vsup (maximum supply voltage) is set to 36V.Normal operation requires a voltage above 8V for the supply voltage.
BTT60302EKBXUMA1 Features
Supplied from 28V
BTT60302EKBXUMA1 Applications
There are a lot of Infineon Technologies BTT60302EKBXUMA1 Power Switches ICs applications.
- Mobile Communication Devices
- Portable/Handheld Devices
- USB3.1 Power Delivery
- HDD and SSD
- Hot Swap
- Hot Swaps
- PDAs
- USB Protection
- Handheld Devices
- HDD, SSD