BTS716GXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 4 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS716 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 5.5V |
| Interface | On/Off |
| Current - Output (Max) | 2.3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~40V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 250 µs |
| Output Peak Current Limit-Nom | 5.3A |
| Rds On (Typ) | 110m Ω |
| Turn Off Time | 270 µs |
| Built-in Protections | TRANSIENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.6mm |
| RoHS Status | ROHS3 Compliant |
BTS716GXUMA1 Overview
It is packaged in the form of a Cut Tape (CT).Package 20-SOIC (0.295, 7.50mm Width) contains it.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There is a default setting of 4 for output.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Status Flag features.It is part of the BTS716 family of LED drivers.As a result, there are 20 terminations.It contains 4 functions.Its maximum output voltage is 2.3AV.Using a voltage of 12V allows for high efficiency.This LED driver is equipped with a total of 20 pins.In order to operate normally, the supply voltage (Vsup) must remain above 5.5V.
BTS716GXUMA1 Features
Supplied from 12V
BTS716GXUMA1 Applications
There are a lot of Infineon Technologies BTS716GXUMA1 Power Switches ICs applications.
- Wireless/Networking Cards
- Storage (HDDs, SSDs)
- Hot Swaps
- Set-Top Boxes
- PC Card Hot Swap
- HDD and SSD
- Portable GPS Device
- Low Voltage I/O System Power
- Various applications equipped with buttons
- USB3.1 Power Delivery