BTS5240LAUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 12-BSOP (0.295, 7.50mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 12V |
| Terminal Pitch | 1mm |
| Base Part Number | BTS5240 |
| Pin Count | 12 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Current - Output (Max) | 5.5A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~28V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 50A |
| Rds On (Typ) | 21m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SOURCE |
| Length | 7.5mm |
| Width | 6.4mm |
BTS5240LAUMA1 Overview
The package is in the form of a Tape & Reel (TR).This file is included in package 12-BSOP (0.295, 7.50mm Width) Exposed Pad.The mounting type of the LED driver is Surface Mount.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.As a default, the output is set to 2.To operate, it needs a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It comes under the family of BTS5240.It contains 12 terminations.Currently, there are 2 functions associated with the lighting driver.From the lighting driver, there is a maximum output of 5.5AV.It is possible to obtain high efficiency with a supply voltage of 12V.It is equipped with a total of 12 pins.In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 4.5V.
BTS5240LAUMA1 Features
Supplied from 12V
BTS5240LAUMA1 Applications
There are a lot of Infineon Technologies BTS5240LAUMA1 Power Switches ICs applications.
- Hot Swap
- USB Power Distribution
- Solid-State Drives
- HDD and SSD
- Smart Phones, Feature Phones
- Wireless/Networking Cards
- Mobile Communication Devices
- Notebook and Tablet Computers
- Portable GPS Device
- USB Ports/Hubs