BTS500201TADATMA1
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-7, D2Pak (6 Leads + Tab), TO-263CB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2017 |
| Series | Automotive, AEC-Q100, Reversave™ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PSSO-G6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Current - Output (Max) | 29A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~18V |
| Fault Protection | Over Temperature, Over Voltage, Reverse Battery, Short Circuit |
| Turn On Time | 650 μs |
| Output Peak Current Limit-Nom | 35A |
| Rds On (Typ) | 3m Ω |
| Turn Off Time | 650 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.5mm |
| Width | 9.25mm |
| RoHS Status | Non-RoHS Compliant |
BTS500201TADATMA1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).Package TO-263-7, D2Pak (6 Leads + Tab), TO-263CB contains it.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.As a default, the output is set to 1.Operation is based on Not Required supply voltage.Voltage output is N-Channel volts at maximum.It has a total of 6 terminations.The LED driving board has a total of 1 functions.There is a maximum output of 29AV from the LED driver.The supply voltage of 13.5V is conducive to high efficiency.A component of this type is included in the Automotive, AEC-Q100, Reversave? series.For normal operation, the supply voltage (Vsup) must be kept above 8V.
BTS500201TADATMA1 Features
Supplied from 13.5V
BTS500201TADATMA1 Applications
There are a lot of Infineon Technologies BTS500201TADATMA1 Power Switches ICs applications.
- Mobile Communication Devices
- Hot Swap
- Notebook PC
- Portable Music Players
- Portable Video Game Players
- Handheld Devices
- Wireless Modem Data Cards
- USB Ports/Hubs
- HDD, SSD
- Hot Swaps