BTS500151TADATMA1
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-7, D2Pak (6 Leads + Tab) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | Automotive, AEC-Q100 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PSSO-G6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Current - Output (Max) | 33A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.5V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Turn On Time | 700 µs |
| Turn Off Time | 700 µs |
| Built-in Protections | OVER CURRENT; OVER VOLTAGE; UNDER VOLTAGE; TRANSIENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.5mm |
| Width | 9.25mm |
| RoHS Status | ROHS3 Compliant |
BTS500151TADATMA1 Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the TO-263-7, D2Pak (6 Leads + Tab) package.The LED driver is mounted as Surface Mount.The switch type is General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.As a default, the output is set to 1.In order to operate, it requires a voltage supply of Not Required.It has a maximum output voltage of N-Channel volts.It consists of 6 terminations in total.The LED driver has 1 functions.The maximum output of the LED driving board is 33AV.A supply voltage of 13.5V leads to high efficiency.The Automotive, AEC-Q100 series includes this electrical component.For normal operation, the supply voltage (Vsup) should be kept above 8V.
BTS500151TADATMA1 Features
Supplied from 13.5V
BTS500151TADATMA1 Applications
There are a lot of Infineon Technologies BTS500151TADATMA1 Power Switches ICs applications.
- Gaming
- USB Power Distribution
- HDD and SSD
- HDD, SSD
- Portable Music Players
- Solid-State Drives
- Hot-Swap Systems
- Portable/Handheld Devices
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)