BTS500101TADATMA2
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-7, D2Pak (6 Leads + Tab), TO-263CB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, Reversave™ |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Additional Feature | SEATED HGT-NOM |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PSSO-G6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Current - Output (Max) | 40A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~18V |
| Fault Protection | Over Temperature, Over Voltage, Reverse Battery, Short Circuit |
| Turn On Time | 700 µs |
| Output Peak Current Limit-Nom | 48A |
| Rds On (Typ) | 1.6m Ω |
| Turn Off Time | 735 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.5mm |
| Width | 9.25mm |
| RoHS Status | ROHS3 Compliant |
BTS500101TADATMA2 Overview
Tape & Reel (TR) is how it's packaged.The TO-263-7, D2Pak (6 Leads + Tab), TO-263CB package includes it.The mounting type of the LED driver is Surface Mount.This switch is of type General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.The termination count is 6.It contains 1 functions.The LED driver output is limited to 40AV.The supply voltage of 13.5V is conducive to high efficiency.Electrical components such as this are included in the Automotive, AEC-Q100, Reversave? series.Normal operation requires a voltage above 8V for the supply voltage.This LED driver can also produce SEATED HGT-NOM.
BTS500101TADATMA2 Features
Supplied from 13.5V
Additional features like SEATED HGT-NOM
BTS500101TADATMA2 Applications
There are a lot of Infineon Technologies BTS500101TADATMA2 Power Switches ICs applications.
- USB Protection
- Set-Top Boxes
- Mobile Communication Devices
- Hot-Swap Systems
- Portable Video Game Players
- Wireless Headsets
- USB Ports/Hubs
- HDD, SSD
- Storage Drives
- Wearable Devices