BTS436L2GNTMA1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TO-263 |
| Packaging | Tape and Reel |
| JESD-609 Code | e3 |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Supply Voltage-Min (Vsup) | 4.75V |
| Power Dissipation-Max | 75W |
| Nominal Supply Current | 800μA |
| Power Dissipation | 75W |
| Current - Output | 8.8A |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Turn On Time | 200 µs |
| Output Peak Current Limit-Nom | 9.8A |
| Turn Off Time | 250 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.5mm |
| Width | 9.25mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
BTS436L2GNTMA1 Overview
This is included in the TO-263 package.It's packaged in a Tape and Reel shape.Hot-swappable device has a total of 4 terminations.Device SINGLE is in the terminal position.High efficiency can be achieved with a voltage supply of 12V.Surface Mount is the direction in which it is positioned.For stable operation, 150°C°C is the maximum operating temperature.To maintain reliability, it functions at a minimum working temperature of -40°C degrees Celsius.For normal operation, Vsup should be maintained above 4.75V.As a default, it's set to output 1.
BTS436L2GNTMA1 Features
BTS436L2GNTMA1 Applications
There are a lot of Infineon Technologies BTS436L2GNTMA1 hot swap controllers applications.
- Current monitoring
- Overvoltage protection
- Continuous monitoring of device temperature
- Hard drive
- Supply voltage monitoring
- Redundant-array-of-independent-disk (RAID) storage
- Switch
- Disconnect faulty loads before supply voltage drops
- USB interface
- Board or blade insertion into live backplanes