BTS436L2GATMA1
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | SEATED HGT-NOM |
| Max Power Dissipation | 75W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Interface | On/Off |
| Current - Output (Max) | 8.8A |
| Nominal Supply Current | 800μA |
| Output Configuration | High Side |
| Output Current | 9.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Turn On Delay Time | 100 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 41V |
| Turn-Off Delay Time | 120 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.75V~41V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 200 μs |
| Output Peak Current Limit-Nom | 9.8A |
| Rds On (Typ) | 35m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Height | 4.7mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
BTS436L2GATMA1 Overview
It is packaged in the manner of a Tape & Reel (TR).In the TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package, it is included.The lighting driver has the mounting type Surface Mount.The switch type is General Purpose.To ensure reliable operation, the temperature should be set to -40°C~150°C TJ.It is possible to use 1 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts has been specified.It consists of 4 terminations in total.For operation, we use the 5 pins.The LED driver has 1 functions.The LED driver output is limited to 8.8AV.It is possible to obtain high efficiency with a supply voltage of 12V.It is mounted in the way of Surface Mount.This case has the output current set to 9.8A.In addition, SEATED HGT-NOM can be produced using this LED driving board.
BTS436L2GATMA1 Features
Supplied from 12V
Additional features like SEATED HGT-NOM
BTS436L2GATMA1 Applications
There are a lot of Infineon Technologies BTS436L2GATMA1 Power Switches ICs applications.
- USB Ports/Hubs
- Set-Top Boxes
- Storage (HDDs, SSDs)
- Various applications equipped with buttons
- Hot Swaps
- Portable/Handheld Devices
- Storage Drives
- Notebook and Tablet Computers
- Wireless/Networking Cards
- USB3.1 Power Delivery