BTS426L1 E3043
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | TO-220-5 |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2003 |
| Series | PROFET® |
| Feature | Auto Restart, Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Supply Voltage | 5.6V |
| Reach Compliance Code | unknown |
| Base Part Number | BTS426L1 |
| Pin Count | 3 |
| JESD-30 Code | R-PZFM-T5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 5.8A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 400 μs |
| Rds On (Typ) | 50m Ω |
| Turn Off Time | 450 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SOURCE |
| RoHS Status | Non-RoHS Compliant |
BTS426L1 E3043 Overview
The LED driver's packaged as a Tube.There is a package for it in the TO-220-5 package.A Through Hole mounting is used for the LED driving board.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.There are 1 outputs available on this lighting driver.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.In terms of features, the LED driving board has Auto Restart, Status Flag.It belongs to the family BTS426L1.There are 5 terminations in it.As far as the lighting driver is concerned, there are 1 functions.The maximum output of the LED driving board is 5.8AV.Using a voltage of 5.6V allows for high efficiency.The LED driving board is equipped with a total of 3 pins.A component of this type is included in the PROFET? series.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.The Vsup value (maximum supply voltage) is set to 34V.Normal operation requires a voltage above 5V for the supply voltage.
BTS426L1 E3043 Features
Supplied from 5.6V
BTS426L1 E3043 Applications
There are a lot of Infineon Technologies BTS426L1 E3043 Power Switches ICs applications.
- Various applications equipped with buttons
- USB Power Distribution
- Handheld Devices
- Wireless Headsets
- Portable GPS
- Hot Swaps
- Storage Drives
- Gaming
- Solid-State Drives
- Wearable Devices