BTS410F2E3062ANTMA1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SMD/SMT |
| Number of Pins | 5 |
| Packaging | Tape and Reel |
| Pbfree Code | no |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | MOSFET Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 42V |
| Supply Voltage-Min (Vsup) | 4.7V |
| Power Dissipation-Max | 50W |
| Nominal Supply Current | 1mA |
| Power Dissipation | 50W |
| Current - Output | 1.6A |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Output Peak Current Limit-Nom | 1.8A |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 9.9mm |
| Width | 9.2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
BTS410F2E3062ANTMA1 Overview
This is included in the SMD/SMT package.There is a Tape and Reel-shaped package for it.There are a total of 4 terminations on it.In this case, the device is located at terminal SINGLE.There are a total of 3 pins on it.High efficiency can be achieved with a voltage supply of 12V.A 5 pin is used for operation.A gadget like this is self-contained in MOSFET Drivers.As you can see, it is positioned in the direction of Surface Mount.In order to ensure stable operation, a maximum operating temperature of 150°C°C must be set.The system must function at a minimum temperature of -40°C degrees Celsius in order to maintain its reliability.Normally, Vsup should remain above 4.7V.In the Vsup (maximum supply voltage) setting, 42V is selected.Hot Swap is set to output 1 by default.
BTS410F2E3062ANTMA1 Features
The terminal position of 3
BTS410F2E3062ANTMA1 Applications
There are a lot of Infineon Technologies BTS410F2E3062ANTMA1 hot swap controllers applications.
- Automotive circuits
- Firewire
- Disconnect faulty loads before supply voltage drops
- Current limit and current foldback limit functions
- Continuous monitoring of device temperature
- Temperature monitor output
- Servers
- Network switch
- CompactPCI
- Base station