BTS410F2E3062ABUMA1
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | SEATED HGT-NOM; SEATED HGT-CALCULATED |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 50W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 42V |
| Supply Voltage-Min (Vsup) | 4.7V |
| Interface | On/Off |
| Current - Output (Max) | 1.6A |
| Nominal Supply Current | 1mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Nominal Input Voltage | 65V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.7V~42V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.8A |
| Rds On (Typ) | 190m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
BTS410F2E3062ABUMA1 Overview
The package is in the form of a Tape & Reel (TR).It is included in the package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.As a default, the output is set to 1.The LED driving board is powered by a voltage of Not Required.It has a maximum output voltage of N-Channel volts.It is equipped with Auto Restart features.There are 4 terminations in it.During operation, the 5 pins are used.It contains 1 functions.The lighting driver's maximum output is 1.6AV.Using a voltage of 12V allows for high efficiency.Surface Mount is mounted in the way of this lighting driver.The PROFET? series includes this electrical component.The LED driver is self-contained in an econtainer with Peripheral Drivers capacity.This LED driver is configured to have a maximum supply voltage of 42V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 4.7V.Through the use of this lighting driver, we can also produce SEATED HGT-NOM; SEATED HGT-CALCULATED.
BTS410F2E3062ABUMA1 Features
Supplied from 12V
Additional features like SEATED HGT-NOM; SEATED HGT-CALCULATED
BTS410F2E3062ABUMA1 Applications
There are a lot of Infineon Technologies BTS410F2E3062ABUMA1 Power Switches ICs applications.
- HDD, SSD
- Storage Drives
- Hot Swaps
- Storage (HDDs, SSDs)
- Portable/Handheld Devices
- Hot-Swap Systems
- Set-Top Boxes
- Various applications equipped with buttons
- Wireless Headsets
- USB Power Distribution