BTS410E2E3062ANTMA1
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SMD/SMT |
| Packaging | Tape and Reel |
| Pbfree Code | no |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 150°C |
| Min Operating Temperature | -40°C |
| Subcategory | Peripheral Drivers |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Pin Count | 3 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 42V |
| Power Supplies | 4.5/42V |
| Supply Voltage-Min (Vsup) | 4.7V |
| Power Dissipation-Max | 50W |
| Nominal Supply Current | 1mA |
| Power Dissipation | 50W |
| Current - Output | 1.6A |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Driver Number of Bits | 1 |
| Output Peak Current Limit-Nom | 1.8A |
| Turn Off Time | 85 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 9.9mm |
| Width | 9.2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
BTS410E2E3062ANTMA1 Overview
You can find it in the SMD/SMT package.A Tape and Reel-shaped package holds it.4 terminations are present in total.In this case, the device is located at terminal SINGLE.A total of 3 pins are present on it.High efficiency is possible at a voltage of 12V.Despite its self-contained nature, Peripheral Drivers is a very compact device.Surface Mount is its direction of movement.For stable operation, the maximum operating temperature should be 150°C°C.Hot-swappable device functions at a minimum working temperature of -40°C degrees Celsius in order to maintain reliabilHot-swappable devicey.Hot-swappable device is important that the supply voltage (Vsup) is kept above 4.7V for normal operation of the device.42V (maximum supply voltage) is set.Part 4.5/42V uses a power supply that has a voltage.Hot Swap is defaulted to output 1.
BTS410E2E3062ANTMA1 Features
The terminal position of 3
BTS410E2E3062ANTMA1 Applications
There are a lot of Infineon Technologies BTS410E2E3062ANTMA1 hot swap controllers applications.
- Overcurrent protection
- Hard drive
- Load transient protection
- High power circuit board
- Identify faulty boards
- Temperature monitor output
- Limitting the inrush current
- Telecom server
- Base station
- Automatic restart after load failure