BTS307E3062ABUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 220mOhm |
| Terminal Finish | Tin (Sn) |
| Additional Feature | SEATED HGT-NOM; SEATED HGT-CALCULATED |
| Max Power Dissipation | 50W |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10A |
| Interface | On/Off |
| Current - Output (Max) | 1.4A |
| Nominal Supply Current | 2.2mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Not Halogen Free |
| Output Current per Channel | 1.7A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.8V~58V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 80 μs |
| Output Peak Current Limit-Nom | 1.7A |
| Rds On (Typ) | 220m Ω |
| Turn Off Time | 70 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
BTS307E3062ABUMA1 Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package, it is included.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts has been specified.It consists of 4 terminations in total.For operation, we use the 5 pins.As far as the lighting driver is concerned, there are 1 functions.1.4AV is the maximum output of the LED driver.The maximum output current is reduced to 10A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 12V.It is mounted in the way of Surface Mount.It has a resistance of 220mOhm.This electrical component can be found in the PROFET? series.SEATED HGT-NOM; SEATED HGT-CALCULATED can also be produced by using this LED driver.
BTS307E3062ABUMA1 Features
Supplied from 12V
Resistance of 220mOhm
Additional features like SEATED HGT-NOM; SEATED HGT-CALCULATED
BTS307E3062ABUMA1 Applications
There are a lot of Infineon Technologies BTS307E3062ABUMA1 Power Switches ICs applications.
- Smart Phones, Feature Phones
- Wireless Headsets
- Notebook and Tablet Computers
- Mobile Communication Devices
- Storage Drives
- Various applications equipped with buttons
- USB3.1 Power Delivery
- Telecom and Network Systems
- Hot Swaps
- Portable GPS