BTS307 E3062A
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | PROFET® |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Additional Feature | SEATED HGT-NOM; SEATED HGT-CALCULATED |
| Technology | MOS |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BTS307 |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 58V |
| Supply Voltage-Min (Vsup) | 5.8V |
| Interface | On/Off |
| Current - Output (Max) | 1.4A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5.8V~58V |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage |
| Turn On Time | 80 μs |
| Output Peak Current Limit-Nom | 1.7A |
| Rds On (Typ) | 220m Ω |
| Turn Off Time | 70 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 4.5mm |
| Width | 9.25mm |
| RoHS Status | Non-RoHS Compliant |
BTS307 E3062A Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).Package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB contains it.It has been mounted as Surface Mount on the LED driver.General Purpose is the type of switch owned by it.It is recommended that the temperature be set to -40°C~150°C TJ for reliable operation.The LED driver is equipped with 1 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It belongs to the BTS307 family.There are 4 terminations in it.The LED driving board has a total of 1 functions.This lighting driver is capable of delivering a maximum output of 1.4A volts.With a supply voltage of 12V, high efficiency is possible.This electrical component is included in the PROFET? series.The lighting driver is configured to have a maximum supply voltage of 58V (Vsup).A normal operation requires that the supply voltage (Vsup) remain above 5.8V.Using this LED driver, it is also possible to produce SEATED HGT-NOM; SEATED HGT-CALCULATED.
BTS307 E3062A Features
Supplied from 12V
Additional features like SEATED HGT-NOM; SEATED HGT-CALCULATED
BTS307 E3062A Applications
There are a lot of Infineon Technologies BTS307 E3062A Power Switches ICs applications.
- USB Power Distribution
- Solid-State Drives
- Hot Swaps
- Low Voltage I/O System Power
- Solid State Drivers
- Set-Top Boxes
- Wireless Headsets
- Portable Devices
- Portable GPS
- Portable GPS Device