BTN8960TAAUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-8, D2Pak (7 Leads + Tab), TO-263CA |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | NovalithIC™ |
| Feature | Latch Function, Slew Rate Controlled, Status Flag |
| Part Status | Last Time Buy |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Applications | DC Motors, General Purpose |
| Additional Feature | SEATED HGT-NOM; SEATED HGT-CALCULATED |
| Technology | DMOS |
| Voltage - Supply | 6V~40V |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Max Output Current | 70A |
| Interface | Logic |
| Output Configuration | Half Bridge |
| Halogen Free | Halogen Free |
| Output Current per Channel | 30A |
| Collector Emitter Voltage (VCEO) | 40V |
| Max Collector Current | 30A |
| Voltage - Load | 6V~40V |
| Fault Protection | Current Limiting, Over Temperature, Short Circuit, UVLO |
| Turn On Time | 34 μs |
| Output Peak Current Limit-Nom | 42A |
| Rds On (Typ) | 7.5m Ω LS, 6.7m Ω HS |
| Turn Off Time | 23 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Motor Type | Brushless DC (BLDC) |
| Output Current Flow Direction | SOURCE SINK |
| Current - Peak Output | 70A |
| Load Type | Inductive |
| Height | 4.4mm |
| Length | 10mm |
| Width | 9.25mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
BTN8960TAAUMA1 Overview
Tape & Reel (TR) is used to package H bridge.H bridge is included in the TO-263-8, D2Pak (7 Leads + Tab), TO-263CA package as a cost-saving measure.Bridge driver is possible to ensure improved reliabilbridge drivery by varying the supply voltage of 6V~40V.In Surface Mount, H bridge circuit is mounted.The operating temperature of -40°C~150°C TJ enables motor driver H bridge to work normally.There are a variety of applications for H bridge motor driver, including DC Motors, General Purpose.On the PCB H gate is mounted using Surface Mount.Among full bridges specific characteristics is Latch Function, Slew Rate Controlled, Status Flag.A transmission line can be terminated at a 7 termination with the H bridge whose characteristic impedance matches the transmission line.A signal interface uses 7 pins as pronged contacts.The H bridge operates at a voltage of 13.5V.It is a kind of electronic H-bridge belonging to the NovalithIC? series.During a specified ambient temperature, the power supply can supply the maximum load current 70A.The output reaches a maximum current when H-bridge reaches 70A.It is made up of two 4 pins that work together to perform the specific functions of this bridge driver.There are 1 outputs on this Hbridge.Furthermore, H-bridge is capable of providing SEATED HGT-NOM; SEATED HGT-CALCULATED.
BTN8960TAAUMA1 Features
Available in TO-263-8, D2Pak (7 Leads + Tab), TO-263CA Package / Case
Operating Temperature at the range of Surface Mount
Subcategory: 70A
With SEATED HGT-NOM; SEATED HGT-CALCULATED Drivers
BTN8960TAAUMA1 Applications
There are a lot of Infineon Technologies BTN8960TAAUMA1 Full Bridge Drivers, Half-Bridge Drivers applications.
- Optical disc drives
- Dual DC motor
- OA equipments
- Voltage Regulators for DDR memory arrays
- Notebook Computers
- Industrial Fans
- Bipolar stepper motor
- High-Performance Gaming Motherboards
- Industrial Automation
- CD players