BSP772TXUMA1
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | miniPROFET® |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BSP772 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 2.6A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 17A |
| Rds On (Typ) | 50m Ω |
| Turn Off Time | 230 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 18 Weeks |
BSP772TXUMA1 Overview
The LED driver's packaged as a Tape & Reel (TR).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the switch type it owns.The temperature should be set to -40°C~150°C TJ to ensure reliable functioning.The lighting driver has a total of 1 outputs that are available for use.A supply voltage of Not Required is required for it to operate.A maximum voltage of N-Channel volts is available from the output of this LED driver.Auto Restart features are available on the lighting driver.It is a member of the BSP772 family.The termination count is 8.It has 1 functions.2.6AV is the maximum output of the LED driver.It is possible to achieve a high level of efficiency with a supply voltage of 13.5V.This LED driver is equipped with a total of 8 pins.A component of this type is included in the miniPROFET? series.The lighting driver is configured to have a maximum supply voltage of 34V (Vsup).Normal operation requires Vsup above 5V.
BSP772TXUMA1 Features
Supplied from 13.5V
BSP772TXUMA1 Applications
There are a lot of Infineon Technologies BSP772TXUMA1 Power Switches ICs applications.
- PDAs
- Telecom and Network Systems
- Storage (HDDs, SSDs)
- Storage Drives
- Portable Devices
- Portable/Handheld Devices
- USB3.1 Power Delivery
- Various applications equipped with buttons
- Mobile Communication Devices
- Hot-Swap Systems