BSP742RIXUMA1
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | miniPROFET® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | MOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 13.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | BSP742 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 34V |
| Supply Voltage-Min (Vsup) | 5V |
| Interface | On/Off |
| Current - Output (Max) | 400mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 5V~34V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Output Peak Current Limit-Nom | 1.2A |
| Rds On (Typ) | 250m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE |
| Output Current Flow Direction | SINK |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
BSP742RIXUMA1 Overview
It is package in Tape & Reel (TR) case.There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.Mounting type Surface Mount is selected for the LED driving board.This switch is of type General Purpose.It is recommended to set the temperature to -40°C~150°C TJ in order to ensure reliable operation.There are 1 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It belongs to the BSP742 family.A total of 8 terminations can be found in it.It is important to note that the LED driving board has 1 functions.This lighting driver is capable of delivering a maximum output of 400mA volts.High efficiency is possible at 13.5V supply voltage.The LED driving board is equipped with a total of 8 pins.This electrical component can be found in the miniPROFET? series.The LED driver is configured with a maximum supply voltage of 34V (Vsup).Normal operation requires a voltage above 5V for the supply voltage.
BSP742RIXUMA1 Features
Supplied from 13.5V
BSP742RIXUMA1 Applications
There are a lot of Infineon Technologies BSP742RIXUMA1 Power Switches ICs applications.
- Wearable Devices
- Various applications equipped with buttons
- Portable Devices
- Portable/Handheld Devices
- PC Cards
- Telecom and Network Systems
- USB Power Distribution
- Portable Music Players
- Portable GPS
- Low Voltage I/O System Power