BQ24271YFFT
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 49-UFBGA, DSBGA |
| Number of Pins | 49 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Digi-Reel® |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 49 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Power Management Circuits |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.4mm |
| Base Part Number | BQ24271 |
| Power Supplies | 4.2/6V |
| Number of Channels | 1 |
| Interface | I2C |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 3.5V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Operating Supply Current | 1.5A |
| Output Current | 1.5A |
| Adjustable Threshold | NO |
| Supply Current-Max (Isup) | 5mA |
| Threshold Voltage | +3.8V |
| Fault Protection | Over Temperature, Over Voltage, Short Circuit |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Switching Frequency | 1.5MHz |
| Voltage - Supply (Max) | 6V |
| Programmable Features | Current |
| Current - Charging | Constant - Programmable |
| Battery Pack Voltage | 3.7V |
| Height | 625μm |
| Length | 0m |
| Width | 0m |
| Thickness | 425μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BQ24271YFFT Overview
If you are looking for it in the Digi-Reel? package, then you have found it.To make it easier for you, it is included with the 49-UFBGA, DSBGA package.There is a mounting type Surface Mount specified for the device.Ideally, the temperature should be set to -40°C~85°C TA in order to ensure reliable performance.In order for the device to function, an analog IC named POWER SUPPLY MANAGEMENT CIRCUIT must be used.To charge the device, a current of Constant - Programmable is required.According to the base part number BQ24271, its related parts can be found.It is possible to find a total of 49 terminations.The battery pack is set to 3.7V when it comes to the battery.Several programmable features, including Current.In order for the product to be functional, it requires that you connect the 49 pins according to the instructions.There are a total of 1 channels available for your use.There is a maximum voltage of 6V for the device.The board is capable of handling a voltage input of zero volts.A 1.5A output current is used for operation.Devices in this category are classified as Power Management Circuits.At a low supply voltage, such as 3.5V, it can operate to the best of its ability.As far as the mounting is concerned, it is mounted in the way of Surface Mount.During the design process, Vsup (maximum supply voltage) was set to 5mA.When it comes to the part's power supply, it is set to 4.2/6V.This gadget's power supply has a current of 1.5A flowing through it.With 1.5MHz switching frequency, the part operates.
BQ24271YFFT Features
Battery pack voltage of 3.7V
1 channels
Power Management Circuits subcategory
Switching frequency of 1.5MHz
49-UFBGA, DSBGA package
BQ24271YFFT Applications
There are a lot of Texas Instruments BQ24271YFFT Battery Chargers ICs applications.
- Conventional charge
- MP3, MP4 player
- Industrial
- Boat
- GPS tracker
- Mobile router
- PDAs
- Marine buoy lights
- Smart speakers
- Electric lift car