BH5510KV-E2
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 8 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 48 |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | Integrated Circuit (IC) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 1.18W |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 300kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 48 |
| Number of Outputs | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 6 |
| Interface | Logic |
| Operating Supply Current | 10.5mA |
| Output Current | 3A |
| Output Current per Channel | 3A |
| Fault Protection | Over Temperature |
| Supply Voltage1-Nom | 5V |
| Supply Voltage1-Min | 3V |
| Length | 7mm |
| Width | 7mm |
BH5510KV-E2 Overview
For packaging, Tape & Reel (TR) is used.A cost-saving measure, H bridge is included in LQFP.On the PCB H gate is mounted using Surface Mount.A transmission line can be terminated at a 48 termination with the H bridge whose characteristic impedance matches the transmission line.As H bridge ic of the signal interface, 48 pins are used as pronged contacts.The H bridge is powered by a voltage supply of 5V.The power supply pins and the output pins are conducting a current of 3A.This bridge driver functions in part thanks to the 48 pins working together.The Hbridge is equipped with 6 outputs.The operating supply voltage is kept at 5V to offer high efficiency.To prevent excessive costs, H bridge is acceptable to set the operating temperature to 85°C.The acceptable minimum value of operating temperature is -40°C so as to avoid excessive costs.
BH5510KV-E2 Features
Available in LQFP Package / Case
Number of Receivers: 5V
Operate supply voltage at -40°C
BH5510KV-E2 Applications
There are a lot of ROHM Semiconductor BH5510KV-E2 Full Bridge Drivers, Half-Bridge Drivers applications.
- VTR
- Dual DC motor
- High-Current DC-DC Point-of-Load Converters
- Voltage Regulators
- Non-V-Core
- Audio-visual equipment
- Quad DC motor
- High current, low profile DC-DC converters
- V-Core
- Telecom Microprocessor