BD6425EFV-E2
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-VSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 28 |
| Operating Temperature | -25°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 19V~42V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 37V |
| Terminal Pitch | 0.65mm |
| Base Part Number | BD642* |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Power Supplies | 37V |
| Supply Voltage-Min (Vsup) | 19V |
| Interface | Analog, PWM |
| Nominal Supply Current | 2mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.2A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 5mA |
| Voltage - Load | 19V~42V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2, 1/4 |
| Height | 850μm |
| Length | 9.7mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
BD6425EFV-E2 Overview
Drivers controllers is designed wDrivers controllersh a package of [0].Parts are packaged in 28-VSSOP (0.173, 4.40mm Width) Exposed Padcases.In general, it is recommended that the part be mounted by Surface Mount.Fits the component connected to General Purpose.A device with a voltage range of 19V~42V volts is available.This device operates at a temperature range of -25°C~150°C TJ.This part provides 28terminations.Voltage can be applied at a rate of 19V~42V volts to the load.Drivers controllers is important to note that this amplifier should be operated at the 37Vsetting.Its recommended mounting way is Surface Mount.Maintain a 1.2Aoutput current for the part.The part number BD642*indicates that it is found.This device is designed with a pin count of 28.The item belongs to the Motion Control Electronics series.A total of 4outputs are available.Stepperrepresents the motor type.
BD6425EFV-E2 Features
Applications : General Purpose
Load voltage across the chip 19V~42V
base on BD642* number
designed with 4 outputs
Motor Type classified as Stepper
BD6425EFV-E2 Applications
There are a lot of ROHM Semiconductor BD6425EFV-E2 motor drivers applications.
- CHMSL (center high-mount stop lamps)
- LED ballasts
- Matrix LED dimmers
- AM radio
- Alternative to HID lights
- Arena lighting
- Mobile phone display backlight and key light driving
- Building technology
- Tail lights
- Infotainment backlighting