BD2204GUL-E2
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, CSPBGA |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Feature | Load Discharge |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Analog IC - Other Type | DPST |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Switch Type | General Purpose |
| Nominal Input Voltage | 4.5V |
| Ratio - Input:Output | 2:1 |
| Voltage - Load | 1.2V~2.4V 2.7V~4.5V |
| Fault Protection | Over Temperature, Reverse Current |
| Rds On (Typ) | 120m Ω |
| RoHS Status | ROHS3 Compliant |
BD2204GUL-E2 Overview
It is packaged in the form of a Tape & Reel (TR).Package 6-UFBGA, CSPBGA contains it.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.A voltage of Not Required is used to power it.A maximum voltage of N-Channel volts is available from the output of this LED driver.A lighting driver with Load Discharge features is available.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, the analog IC DPST is employed.
BD2204GUL-E2 Features
BD2204GUL-E2 Applications
There are a lot of ROHM Semiconductor BD2204GUL-E2 Power Switches ICs applications.
- Set-top-box
- Hot-Swap Systems
- Hot Swap
- Hard Disk Drives
- Storage (HDDs, SSDs)
- Portable GPS
- PC Cards
- Set-Top Boxes
- PC Card Hot Swap
- HDD and SSD