BD2201GUL-E2
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, CSPBGA |
| Surface Mount | YES |
| Operating Temperature | -25°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2014 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 6 |
| JESD-30 Code | R-PBGA-B6 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Rds On (Typ) | 100m Ω |
| Height Seated (Max) | 0.55mm |
| RoHS Status | ROHS3 Compliant |
BD2201GUL-E2 Overview
The package is in the form of a Cut Tape (CT).It's included in the 6-UFBGA, CSPBGA package.Mounting type Surface Mount is selected for the LED driving board.There is a General Purpose switch type associated with it.Ensure reliable operation by setting the temperature to -25°C~85°C TA.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts has been specified.The lighting driver has Load Discharge, Slew Rate Controlled features.It contains 6 terminations.The LED driving board has a total of 1 functions.The maximum output current must drop to 1A to meet the operation criteria.Supply voltages of 3.3V allow for high efficiency.In total, it has 6 pins.The Vsup value (maximum supply voltage) is set to 5.5V.To maintain a normal operation, the supply voltage (Vsup) must be maintained above 2.7V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.
BD2201GUL-E2 Features
Supplied from 3.3V
1 channels
BD2201GUL-E2 Applications
There are a lot of ROHM Semiconductor BD2201GUL-E2 Power Switches ICs applications.
- Set-Top Boxes
- Various applications equipped with buttons
- Telecom and Network Systems
- Set-top-box
- Hard Disk Drives
- Portable GPS
- Gaming
- Wireless/Networking Cards
- Mobile Communication Devices
- HDD and SSD