BD1LB500FVM-CGTR
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | 3.5V~5.5V |
| Input Type | CMOS |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Fault Protection | Over Current, Over Temperature, UVLO |
| Rds On (Typ) | 300m Ω |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 12 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-VSSOP, 8-MSOP (0.110, 2.80mm Width) |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Current - Output (Max) | 1mA |
| Output Configuration | Low Side |
BD1LB500FVM-CGTR Overview
It is packaged in the manner of a Cut Tape (CT).It is included in the package 8-VSSOP, 8-MSOP (0.110, 2.80mm Width).In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -40°C~150°C TJ.As a default, the output is set to 1.A supply voltage of 3.5V~5.5V is required for it to operate.A maximum output voltage of P-Channel volts has been specified.In terms of output, the lighting driver can provide a maximum of 1mA V.Electrical components such as this are included in the Automotive, AEC-Q100 series.BUFFER OR INVERTER BASED PERIPHERAL DRIVER is the type of interface to the LED driver.
BD1LB500FVM-CGTR Features
BD1LB500FVM-CGTR Applications
There are a lot of ROHM Semiconductor BD1LB500FVM-CGTR Power Switches ICs applications.
- Set-Top Boxes
- Hot Swap
- Telecom and Network Systems
- Set-top-box
- Gaming
- HDD, SSD
- Mobile Communication Devices
- Storage (HDDs, SSDs)
- Wireless Headsets
- Notebook PC