BD1HD500EFJ-CE2
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) Exposed Pad |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2015 |
| Series | Automotive, AEC-Q100 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Current - Output (Max) | 3mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 4V~18V |
| Input Type | CMOS |
| Switch Type | General Purpose |
| Nominal Input Voltage | 18V |
| Ratio - Input:Output | 1:1 |
| Interface IC Type | BUFFER OR INVERTER BASED PERIPHERAL DRIVER |
| Fault Protection | Over Current, Over Temperature, UVLO |
| Rds On (Typ) | 500m Ω |
| RoHS Status | ROHS3 Compliant |
BD1HD500EFJ-CE2 Overview
A Cut Tape (CT) is used to package it.In the 8-SOIC (0.154, 3.90mm Width) Exposed Pad package, it is included.The lighting driver has the mounting type Surface Mount.There is a General Purpose switch type associated with it.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.There are 1 outputs available on this lighting driver.A supply voltage of 4V~18V is required for it to operate.It has a maximum output voltage of P-Channel volts.From the lighting driver, there is a maximum output of 3mAV.This electrical component is part of the Automotive, AEC-Q100 series.LED driver interface type is BUFFER OR INVERTER BASED PERIPHERAL DRIVER.
BD1HD500EFJ-CE2 Features
BD1HD500EFJ-CE2 Applications
There are a lot of ROHM Semiconductor BD1HD500EFJ-CE2 Power Switches ICs applications.
- HDD, SSD
- HDD and SSD
- PDAs
- Portable/Handheld Devices
- USB Power Distribution
- Storage Drives
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- Mobile Communication Devices
- Notebook PC