AUIR3313STRL
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Resistance | 5.5mOhm |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Power Rating | 2W |
| Max Power Dissipation | 2W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 23A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIR3313S |
| JESD-30 Code | R-PSSO-G4 |
| Output Voltage | 37V |
| Output Type | N-Channel |
| Max Output Current | 23A |
| Power Supplies | 6/26V |
| Voltage | 37V |
| Interface | On/Off |
| Current | 23A |
| Output Configuration | High Side |
| Power Dissipation | 2W |
| Output Current | 23A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 32 μs |
| Switch Type | General Purpose |
| Clamping Voltage | 40V |
| Output Current per Channel | 23A |
| Rise Time | 16μs |
| Fall Time (Typ) | 32 μs |
| Nominal Input Voltage | 32V |
| Turn-Off Delay Time | 80 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~32V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Number of Drivers | 1 |
| Input Current | 3mA |
| Rds On (Typ) | 5.5m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 200 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Height | 5.084mm |
| Length | 10.67mm |
| Width | 11.33mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIR3313STRL Description
The AUIR3313TRL is a fully protected 4 terminals high side switch. The input signal is referenced to Vcc. When the input voltage Vcc - Vin is higher than the specified threshold, the output power Mosfet is turned on. When the Vcc - Vin is lower than the specified Vil threshold, the output Mosfet is turned off.
AUIR3313STRL Features
Load current feedback
Programmable over-current shutdown
Active clamp
ESD protection
Input referenced to Vcc
Over-temperature shutdown
Reverse battery protection
Lead-Free, RoHS compliant
AUIR3313STRL Applications
5G communication, vehicle electrification, industry 4.0