AUIPS7141RTRL
| Parameters | |
|---|---|
| Factory Lead Time | 23 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-5, DPak (4 Leads + Tab), TO-252AD |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Supply Voltage | 28V |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Operating Supply Voltage | 60V |
| Power Supplies | 28V |
| Voltage | 60V |
| Interface | On/Off |
| Current | 2.1A |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 2.1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~60V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 75m Ω |
| Height | 2.3876mm |
| Length | 6.7056mm |
| Width | 7.49mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
AUIPS7141RTRL Overview
It is packaged in the form of a Tape & Reel (TR).This package is included in TO-252-5, DPak (4 Leads + Tab), TO-252AD.Surface Mount is the mounting type of the LED driver.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage is N-Channel volts.The termination count is 4.For operation, we use the 5 pins.With a supply voltage of 28V, high efficiency is possible.It is positioned in the direction of Surface Mount.A component of this type is included in the Automotive, AEC-Q100 series.This case results in a 2.1A output current.A container with a capacity of Peripheral Drivers contains this self-contained lighting driver.In this case, the power supply is 28V.For maximum efficiency, the supply voltage should be set to 60V.
AUIPS7141RTRL Features
Supplied from 28V
AUIPS7141RTRL Applications
There are a lot of Infineon Technologies AUIPS7141RTRL Power Switches ICs applications.
- USB Ports/Hubs
- PC Cards
- HDD and SSD
- Various applications equipped with buttons
- Portable GPS
- Wireless Modem Data Cards
- Telecom and Network Systems
- USB Power Distribution
- Hot Swaps
- Notebook PC