AUIPS6031S
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Power Rating | 3.1W |
| Max Power Dissipation | 3.1W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS6031S |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.1A |
| Power Supplies | 6/28V |
| Voltage | 36.3V |
| Interface | On/Off |
| Nominal Supply Current | 2.2mA |
| Current | 16A |
| Output Configuration | High Side |
| Power Dissipation | 3.1W |
| Output Current | 3.1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | -300mV |
| Max Input Voltage | 5.5V |
| Rise Time | 20μs |
| Fall Time (Typ) | 30 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Output Peak Current Limit-Nom | 16A |
| Rds On (Typ) | 46m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 4.83mm |
| Length | 10.67mm |
| Width | 11.33mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
AUIPS6031S Overview
It's?packaged?in?the way?of?a?Tube.Package TO-263-5, D2Pak (4 Leads + Tab), TO-263BB contains it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.In this LED driver, there are no outputs available.A voltage of Not Required is used to power it.Voltage output is N-Channel volts at maximum.The lighting driver has Auto Restart features.There is a AUIPS6031S family of things that it belongs to.The termination count is 4.For operation, 5 pins are used.The LED driver has 1 functions.To meet the operation criteria, the maximum output current drops to 3.1A.The supply voltage of 14V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.This electrical component can be found in the Automotive, AEC-Q100 series.As a result, the output current is set to 3.1A.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In this case, the power supply is 6/28V.Its maximum input voltage is 5.5V volts.There is a minimum input voltage of -300mV volts for this LED driver.
AUIPS6031S Features
Supplied from 14V
AUIPS6031S Applications
There are a lot of Infineon Technologies AUIPS6031S Power Switches ICs applications.
- Portable Devices
- Telecom and Network Systems
- USB3.1 Power Delivery
- Notebook and Tablet Computers
- Storage Drives
- Hot Swaps
- Wireless/Networking Cards
- Portable Video Game Players
- Hot Swap
- Various applications equipped with buttons