AUIPS6021STRL
| Parameters | |
|---|---|
| Factory Lead Time | 18 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-263-5, D2Pak (4 Leads + Tab), TO-263BB |
| Number of Pins | 5 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100 |
| Feature | Auto Restart |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 3.1W |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Base Part Number | AUIPS6021S |
| JESD-30 Code | R-PSSO-G4 |
| Number of Outputs | 1 |
| Output Voltage | 39V |
| Output Type | N-Channel |
| Max Output Current | 4.3A |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 6/28V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Output Configuration | High Side |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 40 μs |
| Switch Type | General Purpose |
| Rise Time | 35μs |
| Fall Time (Typ) | 65 μs |
| Turn-Off Delay Time | 80 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature |
| Rds On (Typ) | 24m Ω |
| Built-in Protections | OVER CURRENT; THERMAL; TRANSIENT |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS6021STRL Overview
It is package in Tape & Reel (TR) case.There is a TO-263-5, D2Pak (4 Leads + Tab), TO-263BB package that includes it.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.As a default, the output is set to 1.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts has been specified.It is equipped with Auto Restart features.As you can see, it comes from the AUIPS6021S family.It has a total of 4 terminations.During operation, the 5 pins are used.There are 1 functions of the LED driver.As a result, the maximum output current is reduced to 4.3A in order to meet the operation requirements.With a supply voltage of 14V, high efficiency is possible.It is mounted in the way of Surface Mount.It is included in the Automotive, AEC-Q100 series.When this is the case, the output current is set to 10A.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In this case, Vsup (maximum supply voltage) is set to 28V.Normal operation requires Vsup above 6V.It has a power supply of 6/28V.
AUIPS6021STRL Features
Supplied from 14V
AUIPS6021STRL Applications
There are a lot of Infineon Technologies AUIPS6021STRL Power Switches ICs applications.
- Set-top-box
- USB Power Distribution
- Solid State Drivers
- PC Card Hot Swap
- Portable GPS
- Portable GPS Device
- Smart Phones, Feature Phones
- Smartphone and PDA
- Hot Swap
- HDD, SSD