AUIPS2031RTRL
| Parameters | |
|---|---|
| Factory Lead Time | 23 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 2 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 28V |
| Terminal Pitch | 2.29mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS2031R |
| JESD-30 Code | R-PSSO-G2 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 50V |
| Power Supplies | 6/50V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 2.3A |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 60V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 5 µs |
| Rds On (Typ) | 45m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.39mm |
| Length | 6.54mm |
| Width | 6.095mm |
| RoHS Status | ROHS3 Compliant |
AUIPS2031RTRL Overview
The package is in the form of a Tape & Reel (TR).This package is included in TO-252-3, DPak (2 Leads + Tab), SC-63.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.It is best to set the temperature to -40°C~150°C TJ to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.A voltage of Not Required is used to power it.The maximum output voltage of this LED driver is N-Channel volts.There is a AUIPS2031R family of things that it belongs to.It contains 2 terminations.The LED driving board has a total of 1 functions.This LED driver has a maximum output of 2.3AV.It is possible to obtain high efficiency with a supply voltage of 28V.There is an electrical component included in the Automotive, AEC-Q100 series.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.This LED driver is configured to have a maximum supply voltage of 50V (Vsup).Normal operation requires a voltage above 6V for the supply voltage.In this case, the power supply is 6/50V.
AUIPS2031RTRL Features
Supplied from 28V
AUIPS2031RTRL Applications
There are a lot of Infineon Technologies AUIPS2031RTRL Power Switches ICs applications.
- Notebook PC
- Notebook and Tablet Computers
- USB Ports/Hubs
- Portable/Handheld Devices
- Solid-State Drives
- Hard Disk Drives
- Portable Music Players
- HDD, SSD
- Wireless Modem Data Cards
- Smartphone and PDA