AUIPS1052G
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2011 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS1052G |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 1.1A |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 10 μs |
| Rds On (Typ) | 160m Ω |
| Turn Off Time | 40 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | RoHS Compliant |
AUIPS1052G Overview
It is packaged in the manner of a Tube.The 8-SOIC (0.154, 3.90mm Width) package contains it.Mounting type Surface Mount is selected for the LED driving board.There is a switch type of General Purpose.Keeping the temperature at -40°C~150°C TJ ensures reliable operation.The lighting driver has a total of 2 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be achieved by this LED driver.The AUIPS1052G family consists of this type.In total, there are 8 terminations.As far as the lighting driver is concerned, there are 1 functions.1.1AV is the maximum output of the LED driver.A supply voltage of 14V leads to high efficiency.This electrical component is included in the Automotive, AEC-Q100 series.In order to operate normally, the supply voltage (Vsup) must remain above 6V.
AUIPS1052G Features
Supplied from 14V
AUIPS1052G Applications
There are a lot of Infineon Technologies AUIPS1052G Power Switches ICs applications.
- USB Power Distribution
- Hard Disk Drives
- USB Power Distribution
- Portable/Handheld Devices
- USB Protection
- Portable Video Game Players
- Portable GPS
- Portable Devices
- Gaming
- HDD, SSD