AUIPS1051L
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2009 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Resistance | 250MOhm |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 2W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Current Rating | 1.3A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS1051L |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.3A |
| Voltage | 5.5V |
| Interface | On/Off |
| Current | 1.4A |
| Output Configuration | Low Side |
| Power Dissipation | 2W |
| Output Current | 1.4A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 μs |
| Switch Type | General Purpose |
| Clamping Voltage | 39V |
| Rise Time | 3μs |
| Fall Time (Typ) | 4 μs |
| Turn-Off Delay Time | 15 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 160m Ω |
| Max Junction Temperature (Tj) | 150°C |
| Turn Off Time | 40 μs |
| Built-in Protections | TRANSIENT; OVER CURRENT |
| Height | 1.8mm |
| Length | 6.7mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
AUIPS1051L Overview
As a result, it is packaged in the form of a Tube.The TO-261-4, TO-261AA package contains it.Mounting type Surface Mount is selected for the LED driving board.The switch type is General Purpose.It is recommended that the temperature be set to -40°C~150°C TJ for reliable performance.The LED driver has 1 outputs.It uses a supply voltage of Not Required to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.It belongs to the family AUIPS1051L.The termination count is 3.For operation, 3 pins are used.It has 1 functions.To meet the operation criteria, the maximum output current drops to 1.3A.Using a voltage of 14V allows for high efficiency.As a result, it is mounted in the manner of Surface Mount.Currently, the LED driving board has 250MOhm resistance.The Automotive, AEC-Q100 series includes this electrical component.In this case, the output current is set to 1.4A.
AUIPS1051L Features
Supplied from 14V
Resistance of 250MOhm
AUIPS1051L Applications
There are a lot of Infineon Technologies AUIPS1051L Power Switches ICs applications.
- Wireless/Networking Cards
- Hot Swap
- Hot-Swap Systems
- USB Protection
- Wireless Headsets
- Hard Disk Drives
- HDD and SSD
- Storage Drives
- Wearable Devices
- Hot Swap