AUIPS1041L
| Parameters | |
|---|---|
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS1041L |
| JESD-30 Code | R-PDSO-G4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 28V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 1.5A |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 6V~28V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 80m Ω |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
AUIPS1041L Overview
Tube is the way it's packaged.In the TO-261-4, TO-261AA package, it is included.This LED driving board is mounted using the mounting type Surface Mount.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.A maximum voltage of N-Channel volts is available from the output of this LED driver.I believe it belongs to the AUIPS1041L family.In total, there are 4 terminations.It contains 1 functions.In terms of output, the lighting driver can provide a maximum of 1.5A V.With a supply voltage of 14V, high efficiency is possible.This electrical component is included in the Automotive, AEC-Q100 series.The LED driver is configured with a maximum supply voltage of 28V (Vsup).For normal operation, the supply voltage (Vsup) should be kept above 6V.
AUIPS1041L Features
Supplied from 14V
AUIPS1041L Applications
There are a lot of Infineon Technologies AUIPS1041L Power Switches ICs applications.
- USB Ports/Hubs
- PDAs
- Solid State Drivers
- Low Voltage I/O System Power
- Hot-Swap Systems
- USB Protection
- Various applications equipped with buttons
- Smart Phones, Feature Phones
- Wearable Devices
- Notebook and Tablet Computers