AUIPS1031R
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - with Nickel (Ni) barrier |
| Subcategory | Peripheral Drivers |
| Terminal Position | SINGLE |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 14V |
| Terminal Pitch | 2.29mm |
| Reach Compliance Code | compliant |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | AUIPS1031R |
| JESD-30 Code | R-PSSO-G3 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 28V |
| Power Supplies | 6/28V |
| Supply Voltage-Min (Vsup) | 6V |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Turn On Time | 30 µs |
| Rds On (Typ) | 40m Ω |
| Turn Off Time | 200 µs |
| Built-in Protections | TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 2.39mm |
| Length | 6.54mm |
| Width | 6.095mm |
| RoHS Status | RoHS Compliant |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2010 |
| Series | Automotive, AEC-Q100 |
AUIPS1031R Overview
It's?packaged?in?the way?of?a?Tube.Package TO-252-3, DPak (2 Leads + Tab), SC-63 contains it.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~150°C TJ.By default, it is set to output 1.Operation is based on Not Required supply voltage.Voltage output is N-Channel volts at maximum.It is part of the AUIPS1031R family of LED drivers.A total of 3 terminations have been found in it.It has 1 functions.This LED driver has a maximum output of 3AV.Using a voltage of 14V allows for high efficiency.There is an electrical component included in the Automotive, AEC-Q100 series.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.The lighting driver is configured to have a maximum supply voltage of 28V (Vsup).Normal operation requires Vsup above 6V.A 6/28V power supply is used by the part.
AUIPS1031R Features
Supplied from 14V
AUIPS1031R Applications
There are a lot of Infineon Technologies AUIPS1031R Power Switches ICs applications.
- Wireless/Networking Cards
- Smart Phones, Feature Phones
- Smartphone and PDA
- Hot Swaps
- Wireless Headsets
- Notebook and Tablet Computers
- Portable Music Players
- Portable GPS
- Portable Devices
- Mobile Communication Devices