AUIPS1025R
| Parameters | |
|---|---|
| Output Configuration | Low Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 36V Max |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 28mOhm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | TO-252-3, DPak (2 Leads + Tab), SC-63 |
| Supplier Device Package | DPAK-3 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | Automotive, AEC-Q100 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Interface | On/Off |
| Current - Output (Max) | 4.9A |
AUIPS1025R Overview
The LED driver's packaged as a Tube.Package TO-252-3, DPak (2 Leads + Tab), SC-63 contains it.It has been mounted as Surface Mount on the LED driver.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The LED driver is equipped with 1 outputs.A voltage of Not Required is used to power it.The maximum output voltage is N-Channel volts.In this case, the LED driving board can produce only 4.9AV as its maximum output.A component of this type is included in the Automotive, AEC-Q100 series.
AUIPS1025R Features
AUIPS1025R Applications
There are a lot of Rochester Electronics, LLC AUIPS1025R Power Switches ICs applications.
- Notebook PC
- Hot Swap
- Gaming
- Set-Top Boxes
- Solid-State Drives
- USB Power Distribution
- Solid State Drivers
- Hot-Swap Systems
- Hard Disk Drives
- Hot Swaps