ATV2500BQL-25DI
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 44 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | THROUGH-HOLE |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 40 |
| JESD-30 Code | R-GDIP-T40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 32 |
| Memory Type | EPROM |
| Propagation Delay | 25 ns |
| Frequency (Max) | 36MHz |
| Programmable Logic Type | UV PLD |
| Number of Gates | 2500 |
| Number of Programmable I/O | 24 |
| Output Function | MACROCELL |
| Number of Macro Cells | 24 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 13 |
| In-System Programmable | NO |
| Height Seated (Max) | 5.72mm |
| Length | 52.45mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ATV2500BQL-25DI Overview
There are 24 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.You can find it in package [0].As a result, it has 32 I/O ports programmed.40terminations are programmed into the device.This electrical component has a terminal position of 0.It is powered from a supply voltage of 5V.It is a part of family [0].There are 40pins on the chip.There are 2500 gates, which are devices that acts as a building block for digital circuits. In order to achieve high efficiency, the supply voltage should be maintained at [0].It is adopted to store data in [0].In this case, it is mounted by Surface Mount.The device is designed with pins [0].It operates with the maximal supply voltage of 5.5V.Initially, it requires a voltage of 4.5Vas the minimum supply voltage.A power supply of 5Vvolts is required to operate this device.Currently, there are 24 Programmable I/Os available.Operating temperatures should be higher than 0°C.It is recommended that the operating temperature be below 70°C.The input signals are detected by 13dedicated inputs.It should be below 36MHzat the maximal frequency.It is possible to classify programmable logic as UV PLD.
ATV2500BQL-25DI Features
PLCC package
32 I/Os
40 pin count
44 pins
5V power supplies
ATV2500BQL-25DI Applications
There are a lot of Atmel (Microchip Technology) ATV2500BQL-25DI CPLDs applications.
- Cross-Matrix Switch
- Synchronous or asynchronous mode
- Random logic replacement
- Address decoding
- Bootloaders for FPGAs
- Parity generators
- State machine design
- Portable digital devices
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Field programmable gate