ATV2500BQ-25PI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | DIP |
| Number of Pins | 40 |
| JESD-609 Code | e0 |
| Number of Terminations | 40 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 40 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 24 |
| Memory Type | EPROM |
| Propagation Delay | 25 ns |
| Frequency (Max) | 36MHz |
| Programmable Logic Type | OT PLD |
| Number of Gates | 2500 |
| Output Function | MACROCELL |
| Number of Macro Cells | 24 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 13 |
| In-System Programmable | NO |
| Height Seated (Max) | 5.59mm |
| Length | 52.2mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ATV2500BQ-25PI Overview
There are 24 macro cells. A macro cell is a cell in a mobile phone network that provides radio coverage through the use of a high-power cell site (tower, antenna or mast).DIPis the package in which it resides.There are 24 I/Os programmed in it.40terminations have been programmed into the device.This electrical part is wired with a terminal position of DUAL.A voltage of 5Vprovides power to the device.There is a part in the family [0].It is equipped with 40 pin count.There are 2500 gates, which are devices that acts as a building block for digital circuits. If high efficiency is desired, the supply voltage should be kept at [0].It is adopted to store data in [0].This electronic part is mounted in the way of Through Hole.The device has a pinout of [0].With a maximum supply voltage of [0], it operates.A minimum supply voltage of 4.5V is required for this device to operate.It runs on 5Vvolts of power.The operating temperature should be higher than 0°C.There should be a temperature below 70°Cat the time of operation.The status of input signals is determined by 13dedicated inputs.A maximum frequency of less than 36MHzis recommended.A programmable logic type is categorized as OT PLD.
ATV2500BQ-25PI Features
DIP package
24 I/Os
40 pin count
40 pins
5V power supplies
ATV2500BQ-25PI Applications
There are a lot of Atmel (Microchip Technology) ATV2500BQ-25PI CPLDs applications.
- Field programmable gate
- Cross-Matrix Switch
- Dedicated input registers
- POWER-SAVING MODES
- Storage Cards and Storage Racks
- White goods (Washing, Cold, Aircon ,...)
- Wireless Infrastructure Base Band Unit and Remote Radio Unit
- Synchronous or asynchronous mode
- Boolean function generators
- I/O PORTS (MCU MODULE)