ATV2500B-15JI
| Parameters | |
|---|---|
| Mount | Through Hole |
| Package / Case | J |
| Number of Pins | 44 |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 44 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 44 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of I/O | 24 |
| Memory Type | EPROM |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 66MHz |
| Programmable Logic Type | OT PLD |
| Number of Gates | 2500 |
| Speed Grade | 15 |
| Output Function | MACROCELL |
| Number of Macro Cells | 24 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 13 |
| In-System Programmable | NO |
| Height Seated (Max) | 4.57mm |
| Length | 16.5862mm |
| Width | 16.5862mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
ATV2500B-15JI Overview
Currently, there are 24 macro cells, which are low-power cell sites (towers, antennas, masts) that serve as radio coverage.You can find it in package [0].As you can see, this device has 24 I/O ports programmed into it.There are 44 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.This electrical part has a terminal position of [0], which serves as an important point of access for passengers and freight.The power source is powered by 5Vvolts.There is a part in the family [0].Chips are programmed with 44 pins.2500gates are used to construct digital circuits.For high efficiency, the supply voltage should be maintained at [0].Data storage is performed using [0].Through Holeis the mounting point of this electronic part.The 44pins are designed into the board.It operates at a maximum supply voltage of 5.5V volts.Despite its minimal supply voltage of [0], it is capable of operating.It runs on 5Vvolts of power.In order to operate, the temperature should be higher than 0°C.The operating temperature should be lower than 85°C.To detect the status of input signals, there are 13dedicated inputs.There should be a lower maximum frequency than 66MHz.This kind of FPGA is composed of OT PLD.
ATV2500B-15JI Features
J package
24 I/Os
44 pin count
44 pins
5V power supplies
ATV2500B-15JI Applications
There are a lot of Atmel (Microchip Technology) ATV2500B-15JI CPLDs applications.
- Timing control
- High speed graphics processing
- SFP, QSFP, QSFP-DD, OSFP, Mini-SAS HD Port Management
- I/O PORTS (MCU MODULE)
- Address decoding
- PLC analog input modules
- INTERRUPT SYSTEM
- STANDARD SERIAL INTERFACE UART
- Auxiliary Power Supply Isolated and Non-isolated
- Digital designs