ATSAML11E15A-MU
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SAM L11 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | ATSAML11E |
| JESD-30 Code | S-XQCC-N32 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Oscillator Type | Internal |
| Number of I/O | 25 |
| Speed | 32MHz |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.63V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M23 |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Clock Frequency | 32MHz |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | YES |
| EEPROM Size | 2K x 8 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Width | 5mm |
| RoHS Status | ROHS3 Compliant |
ATSAML11E15A-MU Overview
For space savings, it is available in the 32-VFQFN Exposed Pad package. This is mounted using the Surface Mount method. It comes in the package?of a Tray. A ARM? Cortex?-M23 core processor powers the device. Working at -40°C~85°C TA temperature is recommended. In terms of its program memory type, it is FLASH. A total of 25 I/Os are present. Other components that are comparable to it have the base part number ATSAML11E. A QUAD position is assigned to its terminals. As far as terminations are concerned, there are 32 terminations present. The SAM L11 series contains this electrical component. By using a 3.3V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. This device has a clock running at the frequency of 32MHz. In order to maintain normal operation, Vsup must be above 1.62V. An oscillator of type Internal is used.
ATSAML11E15A-MU Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAML11E15A-MU Applications
There are a lot of Microchip Technology ATSAML11E15A-MU Microcontroller applications.
- Temperature sensing and controlling devices
- Microwave ovens
- Current meter
- Fire alarms
- Tape drives
- Electrocardiogram (EKG)
- Vacuum cleaners
- Dryers
- Projector
- Heart rate monitors