ATSAME70J19A-AN
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tray |
| Published | 2016 |
| Series | SAM E70 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 300MHz |
| Base Part Number | ATSAME70J |
| Supply Voltage-Max (Vsup) | 1.32V |
| Supply Voltage-Min (Vsup) | 1.08V |
| Interface | CAN, Ethernet, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 44 |
| RAM Size | 256K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M7 |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 512KB 512K x 8 |
| Connectivity | CANbus, Ethernet, I2C, IrDA, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 5x12b; D/A 1x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 4 |
| Core Architecture | ARM |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAME70J19A-AN Overview
To save space, it is included in the 64-LQFP package. Mounted using Surface Mount. Package Tray contains it. ARM? Cortex?-M7 core processor is present on the device. Work should be performed at a temperature of -40°C~105°C TA. FLASH is the type of program memory used by it. There are 44 I/Os on it. A component with the same part number as ATSAME70J can be compared to other similar components. A QUAD position is assigned to its terminals. There are a total of 64 terminations in it. The electrical component is part of the series SAM E70. Because the supply voltage is 1.2V, high efficiency can be achieved. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. There are 64 pins used in the construction of this device. A method of mounting is used, which is Surface Mount. In the device, there is a memory capacity of 512kB which may be used to store programs and data. Its core architecture is based on ARM. When working at a frequency of 300MHz it is able to achieve excellent efficiency. A total of 4 timers/counters are present. Normal operation requires a supply voltage (Vsup) above 1.08V. Using an oscillator type Internal, it operates.
ATSAME70J19A-AN Features
64-LQFP package
Mounting type of Surface Mount
ATSAME70J19A-AN Applications
There are a lot of Microchip Technology ATSAME70J19A-AN Microcontroller applications.
- Removable disks
- Hearing aids
- DDC control
- 3D printers
- Mobile computers
- Digital set-top boxes
- DCS control intelligent sensor
- Instrument control
- Multi-meter
- Accu-check