ATSAMD51G18A-MUT
| Parameters | |
|---|---|
| Factory Lead Time | 22 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2017 |
| Series | SAM D51 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Terminal Finish | Matte Tin (Sn) |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 120MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ATSAMD51 |
| JESD-30 Code | S-XQCC-N48 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Interface | CAN, Ethernet, I2C, I2S, LIN, RS-485, SPI, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 37 |
| RAM Size | 128K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.71V~3.63V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M4F |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | EBI/EMI, I2C, IrDA, LINbus, MMC/SD, QSPI, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 2x12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 13 |
| On Chip Program ROM Width | 8 |
| Number of A/D Converters | 2 |
| Number of ADC Channels | 16 |
| Max Junction Temperature (Tj) | 105°C |
| Ambient Temperature Range High | 85°C |
| Number of SPI Channels | 1 |
| Height | 900μm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD51G18A-MUT Overview
There is an option to purchase it in the 48-VFQFN Exposed Pad package, which saves space. Surface Mount is the way to mount it. It comes in the package?of a Cut Tape (CT). It is equipped with a ARM? Cortex?-M4F core processor. The temperature should be kept at -40°C~85°C TA while working. Memory type FLASH is used for program memory. A total of 37 I/Os are present. Based on its base part number of ATSAMD51, other similarly-sized components can be found. The terminals of this device are set to QUAD. There are a total of 48 terminations in it. There are a number of electrical components in the SAM D51 series, including this one. Using the 3.3V supply voltage allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. The devices have a memory size of 256kB that can be used to store programs and data. The system is highly efficient when working at a frequency of 120MHz. It appears that there are 13 timers/counters in use. An oscillator type Internal is required for it to work.
ATSAMD51G18A-MUT Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD51G18A-MUT Applications
There are a lot of Microchip Technology ATSAMD51G18A-MUT Microcontroller applications.
- Washing machine
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Washing machines
- Toasters
- Process control devices
- Mice
- Embedded gateways
- Electronic jamming systems
- Oscilloscopes
- X-ray