ATSAMD21J18A-AF
| Parameters | |
|---|---|
| Factory Lead Time | 11 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP Exposed Pad |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2008 |
| Series | Automotive, AEC-Q100, SAM D21J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD21J18 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Core Architecture | ARM |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
ATSAMD21J18A-AF Overview
Due to the benefits of saving space, it is available in the 64-TQFP Exposed Pad package. This is mounted using the Surface Mount method. It comes in a Tray package. ARM? Cortex?-M0+ core processor is present on the device. The temperature should be kept at -40°C~125°C TA while working. FLASH is its program memory type. The device has 52 I/Os. It has a part number of ATSAMD21J18 that can be used to locate similar components. The position of the device is QUAD at terminal. There are a total of 64 terminations in it. It is a member of the Automotive, AEC-Q100, SAM D21J series of electrical components. Because the supply voltage is 3.3V, high efficiency can be achieved. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A number of 64 pins are used to construct it. A method of mounting is used, which is Surface Mount. Data and programs can be stored on the devices with a memory size of 256kB. ARM is its core architecture. This device works well at 48MHz frequency when it is operating at a high rate of efficiency. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. 8 timers/counters are in use. An oscillator type Internal is required for it to work.
ATSAMD21J18A-AF Features
64-TQFP Exposed Pad package
Mounting type of Surface Mount
ATSAMD21J18A-AF Applications
There are a lot of Microchip Technology ATSAMD21J18A-AF Microcontroller applications.
- Equipment control
- Teletext terminals
- Binding machines
- Embedded gateways
- Refrigerators
- Instrument control
- Industrial instrumentation devices
- Instrument control
- Volt meter
- Aerospace navigation systems