ATSAMD21G18A-MFT
| Parameters | |
|---|---|
| Factory Lead Time | 9 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount, Wettable Flank |
| Package / Case | 48-VFQFN Exposed Pad |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | Automotive, AEC-Q100, SAM D21G |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD21G18 |
| JESD-30 Code | S-XQCC-N48 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, I2S, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 256KB 256K x 8 |
| Connectivity | I2C, LINbus, SPI, UART/USART, USB |
| Bit Size | 32 |
| Data Converter | A/D 14x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 6 |
| Core Architecture | ARM |
| Height Seated (Max) | 0.9mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD21G18A-MFT Overview
For space savings, it is available in the 48-VFQFN Exposed Pad package. Surface Mount, Wettable Flank is used for mounting. Tape & Reel (TR) is the package that contains it. There is a ARM? Cortex?-M0+ as core processor in this device. In order to work effectively, the temperature should be kept at -40°C~125°C TA. Memory type FLASH is used for program memory. There are 38 I/Os on it, which makes it a very simple device. Based on its base part number of ATSAMD21G18, other similarly-sized components can be found. The terminals of this device are set to QUAD. As far as terminations are concerned, there are 48 terminations present. It is a member of the Automotive, AEC-Q100, SAM D21G series of electrical components. By using a 3.3V voltage supply, high efficiency is possible. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. A method of mounting is used, which is Surface Mount. Using the devices' 256kB memory size, you can store programs and data. A core architecture of ARM is used. It is highly efficient when it works at a frequency of 48MHz. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. A total of 6 timers/counters have been set up. The oscillator type Internal is used to operate the device.
ATSAMD21G18A-MFT Features
48-VFQFN Exposed Pad package
Mounting type of Surface Mount, Wettable Flank
ATSAMD21G18A-MFT Applications
There are a lot of Microchip Technology ATSAMD21G18A-MFT Microcontroller applications.
- Gas monitoring systems
- Industrial instrumentation devices
- Automatic control
- Scanners
- Removable disks
- Electronic jamming systems
- Electromechanical control
- Smart highways (navigation, traffic control, information monitoring and car service)
- DDC control
- Process control devices