ATSAMD20J16A-MUT
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Weight | 206.29948mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | SAM D20J |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Base Part Number | ATSAMD20J16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 512 kb |
| ROM (words) | 65536 |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 52 |
| Number of ADC Channels | 20 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J16A-MUT Overview
Due to its space-saving qualities, it is available in the 64-VFQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. It comes in the package?of a Tape & Reel (TR). Device with ARM? Cortex?-M0+ core processor issupported. Work should be performed at a temperature of -40°C~85°C TA. The type of memory it uses is FLASH. There are 52 I/Os on the board. It has a part number of ATSAMD20J16 that can be used to locate similar components. A QUAD position is assigned to its terminals. It consists of 64 terminationals. There are a number of electrical components in the SAM D20J series, including this one. Using the 3.3V supply voltage allows for high efficiency. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. The structure is composed of 64 pins. In Microcontrollers, this component is included. The devices have a maximum memory size of 64kB that can be used to store programs and data. There is ARM core architecture for this system. Using a frequency of 48MHz, it is very efficient. In total, there are 8 timers and counters. It is part of the CORTEX-M0 CPU family. There are 52 programmable I/Os. In order to ensure normal operation, the supply voltage (Vsup) must remain above 1.62V. There is an oscillator type Internal used in this circuit.
ATSAMD20J16A-MUT Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20J16A-MUT Applications
There are a lot of Microchip Technology ATSAMD20J16A-MUT Microcontroller applications.
- Guidance-GPS
- Computed Tomography (CT scan)
- Instrument control
- 3D printers
- Fire alarms
- Hard drives
- Smartphone
- Home video and audio
- Ipad
- Mice