ATSAMD20J16A-MNT
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Series | SAM D20J |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20J16 |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 1.62V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 20x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| DAC Channels | YES |
| Number of Timers/Counters | 8 |
| Density | 512 kb |
| Core Architecture | ARM |
| Number of Programmable I/O | 52 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20J16A-MNT Overview
For space savings, it is available in the 64-VFQFN Exposed Pad package. The way of mounting it is Surface Mount. You can find it in the package of Tape & Reel (TR). A core processor of ARM? Cortex?-M0+ is present in the device. When working, it is recommended that the temperature be kept at -40°C~105°C TA. There is FLASH program memory in it. There are 52 I/Os on it, which makes it a very simple device. To find equivalent components, use its ATSAMD20J16 base part number. A QUAD position is assigned to its terminals. In this case, there are 64 terminationals. Part of the SAM D20J series, this electrical component is used in a variety of applications. High efficiency is possible due to the 3.3V supply voltage. MICROCONTROLLER, RISC is the uPs/uCs/Peripheral IC chip in this gadget. For its construction, 64 pins are used. In order to store data and programs, the devices have a memory size of 64kB. The architecture of its core is ARM. Working at a frequency of 48MHz results in excellent efficiency. A total of 8 timers/counters have been set up. The number 52 represents the number of programmable I/O ports on the board. Normally, the supply voltage (Vsup) should remain above 1.62V. An oscillator of type Internal is used.
ATSAMD20J16A-MNT Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
ATSAMD20J16A-MNT Applications
There are a lot of Microchip Technology ATSAMD20J16A-MNT Microcontroller applications.
- Coffee machines
- Projector
- Smart highways (navigation, traffic control, information monitoring and car service)
- DCS control intelligent sensor
- Vacuum cleaners
- Medical instruments chromatographs
- Information appliances (networking of household appliances)
- Digital TVs
- Toasters
- Mice