ATSAMD20E16A-MU
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 188.609377mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | SAM D20E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Terminal Finish | MATTE TIN |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20E16 |
| Power Supplies | 1.8/3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 64KB 64K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 512 kb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 26 |
| Number of ADC Channels | 10 |
| Height Seated (Max) | 1mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ATSAMD20E16A-MU Overview
It is available in the 32-VFQFN Exposed Pad package for the benefit of saving space. A Surface Mount mounting method is used. You can find it in the package of Tray. It is equipped with a ARM? Cortex?-M0+ core processor. Work should be performed at a temperature of -40°C~85°C TA. FLASH is its program memory type. 26 I/Os are present on the device. It has a part number of ATSAMD20E16 that can be used to locate similar components. The terminals of this device are set to QUAD. There are a total of 32 terminations in it. There are a number of electrical components in the SAM D20E series, including this one. By using a 3.3V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER, RISC as its uPs/uCs/peripheral IC. It is constructed using 32 pins. This component is a part of Microcontrollers. In the device, there is a memory capacity of 64kB which may be used to store programs and data. The architecture of its core is ARM. There is 1.8/3.3V power source in this device. The system is highly efficient when working at a frequency of 48MHz. There are 6 timers/counters. CPU family CORTEX-M0 comprises the part. There are a total of 26 programmable I/Os available. There is an oscillator type Internal used in this circuit.
ATSAMD20E16A-MU Features
32-VFQFN Exposed Pad package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20E16A-MU Applications
There are a lot of Microchip Technology ATSAMD20E16A-MU Microcontroller applications.
- Virtual reality VR robots
- Copiers
- Heart rate monitors
- Wastewater treatment
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Firewalls
- Mobile computers
- Nintendo
- Fire detection & safety devices
- Television