ATSAMD20E15A-AUT
| Parameters | |
|---|---|
| Factory Lead Time | 19 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.801575mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | SAM D20E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20E15 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 256 kb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 26 |
| Number of ADC Channels | 10 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| RoHS Status | ROHS3 Compliant |
ATSAMD20E15A-AUT Overview
For the purpose of saving space, it is available in the 32-TQFP package. It is mounted using the way of Surface Mount. Tape & Reel (TR) is the package that contains it. Device with ARM? Cortex?-M0+ core processor issupported. It is important to keep the temperature at -40°C~85°C TA while working. Memory type FLASH is used for program memory. 26 I/Os are present on the device. To find comparable components, use the ATSAMD20E15 base part number. The terminals of this device are set to QUAD. There are a total of 32 terminations in it. Part of the SAM D20E series, this electrical component is used in a variety of applications. High efficiency is possible due to the 3.3V supply voltage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. It is constructed using 32 pins. The component is included in Microcontrollers. It is possible to store programs and data on the devices, as they have a memory size of 32kB. Its core architecture is ARM. Powered by a 1.8/3.3V source. When working at a frequency of 48MHz it is able to achieve excellent efficiency. In total, there are 6 timers and counters. It is part of the CORTEX-M0 CPU family. 26 is the number of programmable I/O. Using an oscillator type Internal, it operates.
ATSAMD20E15A-AUT Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20E15A-AUT Applications
There are a lot of Microchip Technology ATSAMD20E15A-AUT Microcontroller applications.
- Equipment control
- Guidance-GPS
- Broadband technology, video and voice processing
- Fax machines
- DCS control intelligent sensor
- Microwave ovens
- Toasters
- Automatic staplers
- Data acquisition and control
- Glucose monitoring systems (for Type 1 Diabetes)