ATSAMD20E14A-AU
| Parameters | |
|---|---|
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 32b |
| PWM Channels | YES |
| Number of Timers/Counters | 6 |
| Density | 128 kb |
| Core Architecture | ARM |
| CPU Family | CORTEX-M0 |
| Number of Programmable I/O | 26 |
| Number of ADC Channels | 10 |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 19 Weeks |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Weight | 72.801575mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | SAM D20E |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| Subcategory | Microcontrollers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 48MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ATSAMD20E14 |
| Qualification Status | Not Qualified |
| Power Supplies | 1.8/3.3V |
| Interface | I2C, SPI, UART, USART |
| Memory Size | 16kB |
| Oscillator Type | Internal |
| Number of I/O | 26 |
| RAM Size | 2K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.62V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | ARM® Cortex®-M0+ |
| Peripherals | Brown-out Detect/Reset, POR, WDT |
| Program Memory Type | FLASH |
| Core Size | 32-Bit |
| Program Memory Size | 16KB 16K x 8 |
| Connectivity | I2C, SPI, UART/USART |
| Bit Size | 32 |
| Data Converter | A/D 10x12b; D/A 1x10b |
ATSAMD20E14A-AU Overview
A space-saving advantage is that it is included in the 32-TQFP package. A Surface Mount mounting method is used. It comes in a Tray package. It is equipped with a ARM? Cortex?-M0+ core processor. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. There are 26 I/Os on it, which makes it a very simple device. Based on the ATSAMD20E14 base part number, it can be compared with other components. A QUAD position is assigned to its terminals. In this case, there are 32 terminationals. The SAM D20E series includes this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. A total of 32 pins are required to construct this device. This is a component included in Microcontrollers. In order to store data and programs, the devices have a memory size of 16kB. The core architecture of the system is ARM. Power comes from a source of 1.8/3.3V. At a frequency of 48MHz, it exhibits excellent efficiency. There are currently 6 timers/counters set up on the system. As part of the CORTEX-M0 CPU family, this component is included. A chip with 26 programmable inputs/outputs is available. It works with an oscillator type Internal.
ATSAMD20E14A-AU Features
32-TQFP package
Mounting type of Surface Mount
Microcontrollers subcategory
ATSAMD20E14A-AU Applications
There are a lot of Microchip Technology ATSAMD20E14A-AU Microcontroller applications.
- DCS control intelligent sensor
- Set-top boxes
- Coffee machines
- Toasters
- Wastewater treatment
- Microwave ovens
- Magnetic resonance imaging (MRI)
- DVD\DV\MP3 players
- Accu-check
- Electronic jamming systems